Step by Step Process in Painting Exterior Walls

Painting exterior walls can lead to the best outcomes when the right steps are followed. People who love to maintain their house and do the job by themselves will certainly enjoy painting exterior walls. They'll experience a great day scraping, sanding and preparing the walls before they will climb ladders and mix paint. Here is the step-by-step process in painting exterior walls.

Scrape the Walls

The exterior walls where you can find chipping old paint ought to be scraped in order that the peeling paint will be removed. Seal the crevices and cracks with spackling compound or painter's caulk. Then, sand the walls using 100-grit sandpaper until you can achieve smoothness on the wood.

Use Mild Soap and Water to clean the House

You can make use of a pressure sprayer in washing the house; however, you have to be sure that you do not dig grooves into your wood. Rinse off the soap and invite the wood to dry totally.

Apply Primer Coats

You can apply as much primer coasts as you necessary using a wide brush. You must follow the instructions distributed by the manufacturer.

Apply the Pain

In applying the paint, you have to start from the most notable down starting at your fascia boards and eaves. The whole fascia and eaves perimeter must be painted before you begin on your walls.

Start the Wall Painting

Begin with a wall area from the very best with the use of long horizontal strokes together with your brush. Begin in an area which does not have paint onto it and apply the paint toward the area which you painted. This process should be repeated and soon you have applied the initial coat. Always follow the instructions of the manufacturer on the next coats.

In painting exterior walls, it's important to wear safety glasses constantly. You can even wear something to safeguard your lungs once you sand the walls. Allow spackling compound or painter's caulk dry totally before you start sanding. This will make certain that there will be an excellent covering around your trim. Once you have poured paint right into a bucket, ensure that the paint's lid could be sealed tightly.  外壁塗装  can drive a 6d finish nail and make holes round the paint's rim will assure proper seating of the lid that may preserve your paint ultimately. Finally, it isn't smart to stroke until your brush will be out of paint because this may result in uneven coats.